CC-Link remote I/O unit, 8 in / 8 transistor out, terminal block, 24 V DC

Product Description

This CC-Link remote I/O unit provides eight DC input channels and eight transistor sink-type output channels in a compact terminal block form factor. Inputs are 24 V DC with approximately 7 mA rated current and 10 ms typical response, configured as plus-common, 8 points per common. Outputs support 12/24 V DC loads with up to 0.5 A per point and 4 A per common, delivering 2 ms response and photocoupler isolation. The module occupies one CC-Link station and is designed for control panel installation, featuring robust electrical specifications including AC 500 V withstand voltage, zener surge suppression, and 10 MΩ or greater insulation resistance. Mechanical dimensions are 65 x 151.9 x 46 mm with a mass of 0.33 kg, and it operates from 0 to 55 °C with 10–90% RH non-condensing. It meets JIS B 3502 and IEC 61131-2 vibration and impact criteria and is suitable for elevations up to 2000 m, overvoltage category II, pollution degree 2. External wiring uses two-piece terminal blocks with M3.5 screws for power, communication, and I/O sections.

Key Features

• •8 DC inputs, plus common type
• •8 sink transistor outputs, 12/24 V DC
• •0.5 A per point, 4 A per common
• •10 ms input response, 2 ms output response
• •Photocoupler isolation on I/O
• •One CC-Link occupied station
• •Compact 65 x 151.9 x 46 mm module

Buy Options

Condition, indicative price, stock, and lead time. Confirm current availability via RFQ.

Specifications

Model number

AJ65BTB1-16DT

Station type

Remote I/O station

Number of occupied stations

1 station

Input points

8 points, plus common type

Rated input voltage

24 V DC (ripple ≤5%), allowable 19.2–28.8 V

Rated input current

About 7 mA

Input response time

OFF → ON: 10 ms or less; ON → OFF: 10 ms or less

Input resistance

About 3.3 kΩ

Output points

8 points, transistor output (sink type)

Rated load voltage

DC 12/24 V (ripple ≤5%)

Used load voltage range

DC 10.2–28.8 V

Maximum load current

0.5 A per point, 4 A per common

Output response time

OFF → ON: 2 ms or less; ON → OFF: 2 ms or less (resistive)

Output isolation

Photocoupler isolation

Surge suppressor

Zener diode

Unit power supply voltage

DC 24 V (ripple ≤5%), allowable 15.6–28.8 V

Current consumption

70 mA or less (typ at 24 VDC)

Withstand voltage

Between DC external terminal and ground: AC 500 V for 1 minute

Insulation resistance

500 VDC, 10 MΩ or more to ground

Dimensions

65 (H) x 151.9 (W) x 46 (D) mm

Mass

0.33 kg

Operating temperature

0 to 55 °C

Storage temperature

-20 to 75 °C

Operating humidity

10 to 90% RH, non-condensing

Storage humidity

10 to 90% RH, non-condensing

Vibration resistance

JIS B 3502, IEC 61131-2; intermittent 3.5 mm 5–8.4 Hz, 9.8 m/s² 8.4–150 Hz

Continuous vibration

1.75 mm 5–8.4 Hz, 4.9 m/s² 8.4–150 Hz

Impact resistance

147 m/s², 3 times in X, Y, Z

Use elevation

0 to 2000 m

Installation location

In the control panel

Overvoltage category

II or less

Pollution degree

2 or less

External wiring

Two-piece terminal blocks (M3.5 screw); power/comm: 7 points; I/O: 27 points

I/O common configuration

8 points/common, 1-wire terminal type

Output section external supply

DC 12/24 V, allowable 10.2–28.8 V

Part #

AJ65BTB1-16DT

Category

PLCs/Machine Control

Category

PLC Module/Rack

Weight

0.64 lbs

FAQ