What PROFIBUS data rates are supported?
9.6 Kbaud to 12 Mbaud with auto detection
1 actual photo shown first. Reference images are model-matched and must be confirmed before purchase.
Fanuc
IC200BEM002
Profibus DP Network Slave Module, 9.6 Kbaud–12 Mbaud, 9‑pin D‑sub
Fanuc
From $448.2In stock
- GTIN
- 0359420178258
Product Description
This module is a PROFIBUS‑DP network slave designed for VersaMax systems and identified by part number IC200BEM002. It supports PROFIBUS data rates from 9.6 Kbaud up to 12 Mbaud with auto‑detection and provides up to 384 bytes of I/O data, with a maximum of 244 bytes for either input or output at a time. The interface uses a 9‑pin D‑sub connector and supports up to 32 stations without a repeater and up to 125 stations with a repeater. Typical input impedance is specified between 135 and 165 ohms, and wiring is specified around the 0.64 mm gauge. Firmware version 1.00 resides in flash and can be field‑updated via a PC over the serial port. Status indicators include OK/Power and COM LEDs for health and communication. Power is sourced from the 5 V bus with documented consumption around 350–460 mA depending on source. The module is intended for indoor installation, commonly DIN‑rail mounted, and integrates into PROFIBUS‑DP networks as a configurable slave address from 1 to 125.
Key Features
- •Profibus DP slave, auto rate detection
Buy Options
Condition, indicative price, stock, and lead time. Confirm current availability via RFQ.
ConditionPriceAvailabilityLead time
New
Price: $681.3
Availability: 16 in stock
Lead time: Ships from stock
Never Used
Price: RFQ
Availability: Sourced on request
Lead time: Quoted after RFQ
Used
Price: $448.2
Availability: 16 in stock
Lead time: Ships from stock
FNFP
Price: $873.4
Availability: 8 in stock
Lead time: Ships from stock
Specifications
- Manufacturer Part Number
- IC200BEM002
- Network Type
- PROFIBUS‑DP slave
- Data Rate
- 9.6 Kbaud to 12 Mbaud
- I/O Data Capacity
- 384 bytes total, up to 244 bytes input or output
- Stations Supported
- 32 without repeater, 125 with repeater
- Connector
- 9‑pin D‑sub
- Input Impedance
- 135–165 Ω
- Power Consumption
- 460 mA from 5 V bus (some sources list 350 mA)
- Firmware
- Version 1.00, flash upgradable via serial
- Indicators
- OK/Power LED, COM LED
- Mounting
- DIN rail
- GTIN
- 0359420178258
- Weight
- 0.50 lb (0.23 kg)
- Part #
- IC200BEM002
- Category
- PLCs/Machine Control
- Category
- Brick PLC
- Weight
- 0.44 lbs
Before we quote this part
Actual photos when available
Nameplate, condition, and visible wear can be shared before quote when stock photos are not enough.
Test notes for used units
Power-on or function test status is stated when available, with clear condition grading.
Trackable global shipping
DHL, FedEx, UPS, or forwarder options can be quoted with packing photos and tracking details.
Clear DOA boundary
For tested units, quote terms can include 7-day DOA support unless otherwise stated.
Independent sourcing disclaimer
We are not an authorized distributor, reseller, or representative of Siemens, Mitsubishi, Omron, or other manufacturers listed on this site. All product names, trademarks, brands, and logos are the property of their respective owners. Products may be used, refurbished, surplus, or sourced from the secondary market unless otherwise stated.
Need IC200BEM002 availability?
Prices and stock can change. Submit quantity, required condition, and destination for a current quote.
FAQ
How many stations can the module support?
Up to 32 without a repeater and up to 125 with a repeater
What is the I/O data capacity?
384 bytes total, with up to 244 bytes of input or output at a time
What connector type is used?
9‑pin D‑sub for PROFIBUS DP
Can the firmware be updated?
Yes, firmware v1.00 in flash is upgradable via serial connection