What signal ranges are supported?
Each channel supports 4–20 mA current and either 0–10 VDC or ±10 VDC voltage
1 actual photo shown first. Reference images are model-matched and must be confirmed before purchase.
Fanuc
IC200ALG260
Analog Input Module, 8 channels, voltage/current, VersaMax
Fanuc
From $1,186In stock
Product Description
The IC200ALG260 is an 8-channel analog input module for VersaMax systems designed to accept either voltage or current signals on a per-channel basis. Inputs are single-ended and grouped, supporting 4–20 mA current and selectable 0–10 VDC or ±10 VDC voltage ranges. Channel resolution is 12 bits, with module data reported at 16-bit word width to the controller. The module offers fast acquisition with a 0.4 ms update rate and a selectable input filter with a typical 5 ms response to help balance noise rejection and throughput. Diagnostics include under/over-range, open wire, internal power loss, non-volatile memory fault, and high/low alarm, with LED indicators for status. Optical isolation is provided between field and logic for increased robustness. Backplane power draw is approximately 125–130 mA at 5 VDC. Configuration is software-driven, including range and mode selection per channel. The unit is compatible with VersaMax PLC CPU firmware version 1.20 or later.
Key Features
- •8 single ended analog inputs, one group, Per channel voltage or current selection, 4–20 mA and ±10 V or 0–10 V ranges, 12 bit channel resolution, 0.4 ms update rate, Selectable input filter ~5 ms response, Diagnostic and status LEDs
Buy Options
Condition, indicative price, stock, and lead time. Confirm current availability via RFQ.
ConditionPriceAvailabilityLead time
New
Price: $1,502
Availability: 13 in stock
Lead time: Ships from stock
Never Used
Price: $1,305
Availability: 8 in stock
Lead time: Ships from stock
Used
Price: $1,186
Availability: 39 in stock
Lead time: Ships from stock
FNFP
Price: $1,976
Availability: 6 in stock
Lead time: Ships from stock
Specifications
- Manufacturer Part Number
- IC200ALG260
- Product Line
- VersaMax
- Input Channels
- 8 single ended, one group
- Signal Types
- Voltage or current, per channel
- Voltage Ranges
- ±10 VDC or 0–10 VDC
- Current Range
- 4–20 mA
- Resolution
- 12 bits (channel), 16-bit words to CPU
- Update Rate
- 0.4 ms
- Input Filter Response
- 5 ms selectable
- Backplane Current
- 125–130 mA at 5 VDC
- Optical Isolation
- 250 VAC continuous; 1500 VAC for 1 minute
- LED Indicators
- OK and INT PWR
- Compatibility
- VersaMax PLC CPU firmware 1.20 or later
- Part #
- IC200ALG260
- Category
- PLCs/Machine Control
- Category
- PLC Module/Rack
- Weight
- 0.55 lbs
Before we quote this part
Actual photos when available
Nameplate, condition, and visible wear can be shared before quote when stock photos are not enough.
Test notes for used units
Power-on or function test status is stated when available, with clear condition grading.
Trackable global shipping
DHL, FedEx, UPS, or forwarder options can be quoted with packing photos and tracking details.
Clear DOA boundary
For tested units, quote terms can include 7-day DOA support unless otherwise stated.
Independent sourcing disclaimer
We are not an authorized distributor, reseller, or representative of Siemens, Mitsubishi, Omron, or other manufacturers listed on this site. All product names, trademarks, brands, and logos are the property of their respective owners. Products may be used, refurbished, surplus, or sourced from the secondary market unless otherwise stated.
Need IC200ALG260 availability?
Prices and stock can change. Submit quantity, required condition, and destination for a current quote.
FAQ
What is the channel resolution?
12-bit resolution per channel with 16-bit words reported to the CPU
How fast does the module update?
Typical update rate is 0.4 ms with a selectable filter having ~5 ms response
What diagnostics are available?
Under/over-range, open wire, internal power loss, NVM fault, and high/low alarms with LED status
What is the backplane power draw?
Approximately 125–130 mA from the 5 VDC bus